Miles Per Gallon Java Program | 4 Ways

in Java Programs October 17, 2024 Comments Off on Miles Per Gallon Java Program | 4 Ways

Java Program To Calculate Miles Per Gallon – In this article, we will detail in on all the possible methods used to calculate miles per gallon in Java. The following source code has been written in multiple ways for easy understand.

Suitable examples and sample programs have been included in order to make you understand simply.

The methods used in this article are as follows:

Using Standard Method
Using Command Line Arguments
Using Static Method
Using Separate Class

Miles per Gallon is considered to be the average mileage of a motor vehicle which uses Petrol or Diesel as fuel. Miles represents the distance the vehicle travelled in the units of Miles.

1 Gallon is a measure of the fuel used. To convert 1 Gallon into the much more normally used SI units,

1 Gallon = 3.785 litres.

Hence, the lower the gallons of fuel is consumed, the better is its mileage.

Thus, the various methods to calculate Miles per Gallon in Java Programming are as follows:

Java Code Miles Per Gallon

In this method, the entire logic along with the input output operations is written in the main method of the Java Class.

For any problem, the first step is to take inputs as desired followed by the necessary steps to be taken and operations to be performed to arrive at the output.

In our present problem, we require two inputs- Miles traveled (miles) of the decimal type therefore, we make use of double and Gallons (gallons) which is also of type double. After getting the input by making use of scanner class, we make use of the following formula:

Mileage = Miles/Gallons

This is the desired output which is also of type double which can be displayed on our output screen.

import java.util.Scanner;
class Mpg
{
	public static void main(String arg[])
	{
	Scanner scan = new Scanner(System.in); 
      	System.out.println("Enter miles travelled : ");
      	double miles = scan.nextDouble(); 
      	System.out.println("Enter gallons : ");
      	double gallons= scan.nextDouble(); 
	double mpg=miles/gallons; 
      	System.out.println("miles per gallons = "+mpg);
	}
}

import java.util.Scanner;

class Mpg

{

public static void main(String arg[])

{

Scanner scan = new Scanner(System.in);

System.out.println("Enter miles travelled : ");

double miles = scan.nextDouble();

System.out.println("Enter gallons : ");

double gallons= scan.nextDouble();

double mpg=miles/gallons;

System.out.println("miles per gallons = "+mpg);

}

Output1:

Enter miles travelled :
750
Enter gallons :
3
miles per gallons = 250.0

Enter miles travelled :

750

Enter gallons :

miles per gallons = 250.0

Using Command Line Arguments

Just like making use of scanner class in the above example, there is another possibility to take inputs at run time. This is by making use of command line arguments.

In here, following the run command with the name of Java code to be executed, after a space a first argument (arg[0]) is to be given which will be stored in a variable (km) which is again followed by a space and the second argument (arg[1]) which will be stored in another variable (gallons or g).

While taking inputs, since our first input is in km format whereas we require it in miles, conversion is to be made. Th formula used for conversion is:

Miles (m)= km/1.609344

Now, with all the requirements in hand, the calculation is to be performed using the formula

Mileage = Miles/Gallons, which is the desired output.

import java.util.Scanner;
class Mpg
{
	public static void main(String arg[])
	{
      	double km = Double.parseDouble(arg[0]); 
      	System.out.println("kilo meters travelled is: "+km);
	double m=km/1.609344;
      	double g = Double.parseDouble(arg[1]);
      	System.out.println("Gallons used : "+g); 
	double mpg=m/g; 
      	System.out.print("Miles per gallons = "+mpg);
	}
}

import java.util.Scanner;

class Mpg

{

public static void main(String arg[])

{

double km = Double.parseDouble(arg[0]);

System.out.println("kilo meters travelled is: "+km);

double m=km/1.609344;

double g = Double.parseDouble(arg[1]);

System.out.println("Gallons used : "+g);

double mpg=m/g;

System.out.print("Miles per gallons = "+mpg);

}

Output1:

kilo meters travelled is: 600.0
Gallons used : 50.0
Miles per gallons = 7.4564543068480065

kilo meters travelled is: 600.0

Gallons used : 50.0

Miles per gallons = 7.4564543068480065

Using Static Method

In both the above examples, it is observed that, the entire code has been written in the main method itself which is not efficient when considering the readability factor. Hence, in order to make the readability better, it is advisable to split up the code based on its logic.

In the current problem, the main method can contain all the input output operations and call another static method (distance).

In this static method (distance), the inputs taken (miles and gallons) can be passed as arguments. The static method (distance) will then perform the calculations required using the formula,

This is then returned to the main method in which the output operations will be performed to display on the output screen.

import java.util.Scanner;
class Mpg
{
	public static void main(String arg[])
	{
	Scanner scan = new Scanner(System.in); 
      	System.out.print("Enter miles travelled : ");
      	double miles = scan.nextDouble(); 
      	System.out.print("Enter gallons : ");
      	double gallons= scan.nextDouble();  
      	System.out.print("miles per gallons = "+distance(miles,gallons));
	}
	static double distance(double m,double g)
	{ 
	return m/g; 
	}
}

import java.util.Scanner;

class Mpg

{

public static void main(String arg[])

{

Scanner scan = new Scanner(System.in);

System.out.print("Enter miles travelled : ");

double miles = scan.nextDouble();

System.out.print("Enter gallons : ");

double gallons= scan.nextDouble();

System.out.print("miles per gallons = "+distance(miles,gallons));

}

static double distance(double m,double g)

{

return m/g;

}

Using Separate Class

When everything is written in a single class and a code is lengthy, it becomes a hideous task to find the portion of code we would like to view.

To make this approach easier, it is better to split the code into different classes based on their logic and functionality.

In this problem, we can split the code into two portions or classes.

One class consisting of the main method which takes care of reading the inputs (km and g). The main method then creates an object referencing the other class (MgpCal).

When object is created, the constructor in that class gets executed. This constructor consists of statements to perform operations to find the miles per gallon.

First it converts kilometres to miles and then finds the mileage (miles/gallons).

This is stored in a variable of class MgpCal which is printed in the main method using the object created for this class and thereby calling the variable with that object. This is round figured using round method of the Math package and printed.

import java.util.Scanner;
class MpgCal
{
	double mpg;
	MpgCal(double k,double g)
	{ 
	double m=k/1.609344;
	mpg= m/g; 
	}
	
}
class Mpg
{
	public static void main(String arg[])
	{
	Scanner scan = new Scanner(System.in); 
      	System.out.println("Enter kilo meters travelled : ");
      	double km = scan.nextDouble(); 
      	System.out.println("Enter gallons : ");
      	double gallons= scan.nextDouble();  
	MpgCal n=new MpgCal(km,gallons);
      	System.out.println("miles per gallons = "+Math.round(n.mpg));
	}
}

import java.util.Scanner;

class MpgCal

{

double mpg;

MpgCal(double k,double g)

{

double m=k/1.609344;

mpg= m/g;

}

class Mpg

{

public static void main(String arg[])

{

Scanner scan = new Scanner(System.in);

System.out.println("Enter kilo meters travelled : ");

double km = scan.nextDouble();

System.out.println("Enter gallons : ");

double gallons= scan.nextDouble();

MpgCal n=new MpgCal(km,gallons);

System.out.println("miles per gallons = "+Math.round(n.mpg));

}

Output:

Enter kilo meters travelled :
20
Enter gallons :
4
miles per gallons = 3

Enter kilo meters travelled :

Enter gallons :

miles per gallons = 3

Learn Java Java Tutoring is a resource blog on java focused mostly on beginners to learn Java in the simplest way without much effort you can access unlimited programs, interview questions, examples

Miles Per Gallon Java Program | 4 Ways

Java Code Miles Per Gallon

Using Command Line Arguments

Using Static Method

Related Posts !

Check Also

Java Right Arrow Star Pattern Program | Patterns